Today, we are showing a 589nm yellow dpss laser system. The output power is 3000mW. It has two working modes, CW and Modulation, and the switch button is on the back of the laser power supply. Trigger is the modulation signal input interface. There is a protective cover on the connector of the laser module ...
It is 785nm 3W fiber coupled laser system. This is a model in which the laser module and power supply are integrated. It support continuous work and modulation mode. The default is button control, software control function can be customized. The output power of the fiber output end is adjustable from 0 to 3W. And ...
Is is a 689nm red laser system. The output power of the laser is adjustable from 0 to 1800mW. It supports 3 working modes, CW/TTL/Analog. In TTL/Analog modulation mode, an external modulation signal needs to be connected. The following video demonstrates the CW working mode of the laser. This laser is equipped with a pluggable ...
Please watch the following video first: It is a 520nm 2800mW green laser system. This laser supports 3 working modes: CW, TTL, Analog. In addition, the Lock crystal head cannot be pulled out. External signal Mod Input, no need to connect in CW working mode. The laser output power can be adjusted by adjusting the operating ...
It’s a 638nm 30W high power fiber coupled laser system. There are CW/TTL/Analog 3 working modes available on the back of the power supply. When TTL/Analog is selected, external signal access is required. A radiator is added to the bottom of the laser head to extend the continuous working time of the laser. The heat ...
Today we are talking about software-controlled laser source. Let’s check it now. It is 450nm Blue fiber coupled laser source controlled by software. EasyHost is the control software. The connection between the laser and PC software adopts the communication protocol of RS232. The laser supports two working modes: CW/Modulation. When switching to Modulation, an external ...
A diode-pumped solid-state laser (DPSSL) is a solid-state laser made by pumping a solid gain medium, for example, a ruby or a neodymium-doped YAG crystal, with a laser diode. DPSSLs have advantages in compactness and efficiency over other types, and high power DPSSLs have replaced ion lasers and flashlamp-pumped lasers in many scientific applications, and ...
It is 1064nm high power laser with heat sink at the bottom of the laser head. It adopts air cooling mode, with 2 cooling fans. The modulation mode can be selected from the original TTL or Analog, and upgraded to be compatible with both. When the key is turned ON, the laser starts to work. ...
The following are some common laboratory high power laser real shots. These high power lasers are equipped with heat sinks, which can effectively extend the continuous working time of the laser. All of them have three working modes: CW/TTL/Analog. Let’s check it now. The first one is 405nm 12W blue semiconductor laser. High Power Semiconductor Laser — 445nm ...
The following is a demonstration of the operation of the desktop YDFA button control. Let’s check it now. This is a 50mW Ytterbium Doped Fiber Amplifier with PM Fiber. The working wavelength is 1030nm~1070nm. It supports ACC and APC working modes. We can switch the APC/ACC working mode with the left and right buttons. At ...
