This is a 638nm 5Watt high-power semiconductor laser, and a heat sink is added under the laser module. There are CW/TTL/Analog 3 working modes switchable on the back of the laser power supply. In the video is a line laser, a 45° line lens was customized at the laser outlet. Its divergence angle is 45°, 30°~90° ...
It is 637nm 40W powerful laboratory red fiber coupled laser system. The laser module includes a radiator. The laser power supply has a current display and the ‘Adjustor’ knob can adjust the laser output. The three working modes of CW/TTL/Analog can be switched on the back of the power supply. When no optical fiber is installed, ...
Today, we are showing a 589nm yellow dpss laser system. The output power is 3000mW. It has two working modes, CW and Modulation, and the switch button is on the back of the laser power supply. Trigger is the modulation signal input interface. There is a protective cover on the connector of the laser module ...
A diode-pumped solid-state laser (DPSSL) is a solid-state laser made by pumping a solid gain medium, for example, a ruby or a neodymium-doped YAG crystal, with a laser diode. DPSSLs have advantages in compactness and efficiency over other types, and high power DPSSLs have replaced ion lasers and flashlamp-pumped lasers in many scientific applications, and ...
This is 880nm 20W high power infrared laser. A fiber coupling interface is added to the laser output port, which can be inserted into a fiber. A cooling device is added at the bottom of the laser module, which is composed of aluminum sheet and cooling fans. The laser supports CW continuous work and modulation ...
This is 940nm 20W IR Laser Source. The laser head has a heat dissipation base, which can effectively extend the continuous working time of the laser. The radiator has two cooling fans. The back of the laser head and the power supply, the 3 working modes of the laser, CW/TTL/Analog are set from the back ...
It’s a 520nm 15W fiber coupled laser system. There is a radiator at the bottom of the laser head. The radiator is composed of an aluminum sheet and a cooling fan. The’Adjustor’ knob on the power supply is used to adjust the size of the current to control the laser output power. The’CW|TTL|Analog’ on the ...
It’s a 532nm 3000mW DPSS laser system. It’s customized into a line laser. We added line lens, and the fan angle is 30°. The focal length is customized at 2 meters, and the light is the smallest at 2m. Installation is very simple. First, connect the laser head and laser power supply, then connect the ...
This is 532nm 5W fiber coupled laser. It is a customized laser. Customized features is this laser system will output a low-power guide red laser before high-power green laser output. Add a modulation signal DC 0-5V, anlog modulation can adjust the 532nm laser’s output power. This test, we add 3.7V and we can get near ...
It’s a 808nm 10W high power infrared fiber coupled laser. This 808nm laser system includes a laser head, a power supply, a fiber, a collimator. There are CW, TTL, Analog 3 working mode can be choosen. And the focal length of collimator is adjustable. Let’s check it now.
