Polarization-maintaining fiber lasers have broad application prospects in the field of optics due to their unique polarization-maintaining properties. The new generation of 780nm 80mW polarization-maintaining fiber lasers has been fully upgraded based on the original technology, not only retaining the original advantages, but also achieving technological innovation in many aspects. The one in the video ...
This time we bring a 915nm high power semiconductor laser. The bottom of the laser module is equipped with a heat sink. Aluminum heat sink and cooling fan can effectively prolong the continuous working time of high-power lasers. There are three working modes of CW/TTL/Analog on the power supply for selection. The power of 60W ...
It is 785nm 3W fiber coupled laser system. This is a model in which the laser module and power supply are integrated. It support continuous work and modulation mode. The default is button control, software control function can be customized. The output power of the fiber output end is adjustable from 0 to 3W. And ...
This is 880nm 20W high power infrared laser. A fiber coupling interface is added to the laser output port, which can be inserted into a fiber. A cooling device is added at the bottom of the laser module, which is composed of aluminum sheet and cooling fans. The laser supports CW continuous work and modulation ...
This is 940nm 20W IR Laser Source. The laser head has a heat dissipation base, which can effectively extend the continuous working time of the laser. The radiator has two cooling fans. The back of the laser head and the power supply, the 3 working modes of the laser, CW/TTL/Analog are set from the back ...
It is a 980nm 20W fiber coupled laser with adjustable power supply. 20W is very high power, we added a radiator at the laser bottom and the radiator includes two cooling fans. There are CW/TTL/Analog 3 working mode for this laser system. The fiber is 600μm multi-mode fiber with SMA905 interface. Installation introduction: 1. Connect ...
It’s a 808nm 10W high power infrared fiber coupled laser. This 808nm laser system includes a laser head, a power supply, a fiber, a collimator. There are CW, TTL, Analog 3 working mode can be choosen. And the focal length of collimator is adjustable. Let’s check it now.
It’s a 1064nm infrared dpss laser source, and the laser power is 8000mW. Let’s check it now.
750nm Near IR Laser System 0~1500mW Output Power Adjustable CW and TTL Modulation Together Customized Requirements: Minimum Laser Spot at 20cm
