Is is a 689nm red laser system. The output power of the laser is adjustable from 0 to 1800mW. It supports 3 working modes, CW/TTL/Analog. In TTL/Analog modulation mode, an external modulation signal needs to be connected. The following video demonstrates the CW working mode of the laser. This laser is equipped with a pluggable ...
Please watch the following video first: It is a 520nm 2800mW green laser system. This laser supports 3 working modes: CW, TTL, Analog. In addition, the Lock crystal head cannot be pulled out. External signal Mod Input, no need to connect in CW working mode. The laser output power can be adjusted by adjusting the operating ...
It’s a 638nm 30W high power fiber coupled laser system. There are CW/TTL/Analog 3 working modes available on the back of the power supply. When TTL/Analog is selected, external signal access is required. A radiator is added to the bottom of the laser head to extend the continuous working time of the laser. The heat ...
Today we are talking about software-controlled laser source. Let’s check it now. It is 450nm Blue fiber coupled laser source controlled by software. EasyHost is the control software. The connection between the laser and PC software adopts the communication protocol of RS232. The laser supports two working modes: CW/Modulation. When switching to Modulation, an external ...
A diode-pumped solid-state laser (DPSSL) is a solid-state laser made by pumping a solid gain medium, for example, a ruby or a neodymium-doped YAG crystal, with a laser diode. DPSSLs have advantages in compactness and efficiency over other types, and high power DPSSLs have replaced ion lasers and flashlamp-pumped lasers in many scientific applications, and ...
The following are some common laboratory high power laser real shots. These high power lasers are equipped with heat sinks, which can effectively extend the continuous working time of the laser. All of them have three working modes: CW/TTL/Analog. Let’s check it now. The first one is 405nm 12W blue semiconductor laser. High Power Semiconductor Laser — 445nm ...
Today we are going to demonstrate a 543nm 100mW fiber coupled laser. The output can be adjusted by the rotary button on the power supply. There are 3 working modes for the laser to choose from. Select the working mode CW/TTL/Analog by the sliding button on the back of the power supply. This laser coupled a 1000μm, ...
It’s a 638nm 15W semiconductor laser system.15W laser is high power, we have equipped a radiator in the laser head. The radiator at the bottom of the laser head has 3 cooling fans, which can effectively extend the continuous working time of the high-power laser. The CW/TTL/Analog on the back of the power supply has ...
This is a video about laser OEM. As a professional laser manufacturer, CivilLaser can provide customized Logo services for laser dealers. In the video is the 532nm 10W DPSS Laser produced by us. We will demonstrate putting our logo sticker on the laser head. let’s check it now. If you need to add your own ...
This is a 520nm 1W fiber coupled laser module. There are CW and TTL working mode. When CW working mode is required. Red and Yellow wire to DC 12V positive. Black and Green wire to DC 12V negative. When TTL working mode is required. Red wire to DC 12Vpositive. Black wire to DC 12V negative. ...
