This is a 26dBm polarization-maintaining EDFA. Control EDFA with buttons, and software control function can be added. It supports APC and ACC two working modes. Let’s check it now. Polarization-maintaining erbium-doped fiber amplifier (EDFA-PM) is a family of fiber amplifier products dedicated to polarization-maintaining fiber systems. It has the advantages of high gain, low noise, ...
This is the UV deuterium lamp source with broadband wavelength. The wavelength range is 185nm~600nm. Among them, the ultraviolet band of 200nm~300nm has the highest power. The faint purple spot can be seen with the naked eye. Let’s check it now. D-2000 deuterium lamp can produce stable output spectrum of 190-400nm. The peak to peak ...
It’s a 520nm 15W fiber coupled laser system. There is a radiator at the bottom of the laser head. The radiator is composed of an aluminum sheet and a cooling fan. The’Adjustor’ knob on the power supply is used to adjust the size of the current to control the laser output power. The’CW|TTL|Analog’ on the ...
Optical fibers can be classified in various ways according to different characteristics, such as single-mode optical fibers and multi-mode optical fibers according to optical modes. Divided by refractive index: jumper fiber and graded fiber. Among them, according to ITU standards, optical fibers are divided into seven types: G651, G652, G653, G654, G655, G656, G657, among ...
It’s 532nm fiber coupled laser system. It’s a output power tunable laser, 0~20W laser power can be adjusted by button. This laser has three working modes: CW, TTL modulation, Analog modulation. It coupled a SMA905 fiber, the coupling efficiency is about 80% at 400μm fiber. After turning on the laser, it need a few minutes ...
